CANTON BUYING DESK
化妆品包材质量控制 · 现场验收签发件
Cosmetics Packaging QC · On-Site Inspection Issuance
Cosmetics Packaging QC · On-Site Inspection Issuance
化妆品包材行业质量验收报告表
Cosmetics Packaging Inspection & Acceptance Report
依据标准 / Standard: ISO 2859-1, General Inspection Level II (Normal Inspection) · 判定方案 / Decision Schemes: CR AQL 0 / Maj AQL 2.5 / Min AQL 4.0
运作规范请参阅配套文档《化妆品包材行业质量验收执行标准与规范》 / Operational protocols refer to the companion “Cosmetics Packaging Technical Inspection Standards & Protocols”
1. 检验基本履历与抽样方案设定 / Inspection General Profile & Sampling Plan
| 供应商名称 Supplier Name |
采购订单号 (PO) PO Number |
检验执行日期 Inspection Date |
|||
| 包材品名 / SKU Product Name / SKU |
包材材质类型 Material Type |
|
大货总数量 (pcs) Total Order Qty (pcs) |
||
| 现场总箱数 (CTN) Total Cartons (CTN) |
包装完成比例 Packing Completion Ratio |
|
抽样字码 / 样本量 Sampling Code Letter / Sample Size (n) |
字码 / Code Letter / n = pcs | |
| 随机抽样箱号记录 Randomly Selected Carton Nos. Record |
|||||
2. 关键物理指标实测（规格书比对） / Key Physical Dimensions (Compared with Specification)
| 检验项目 Inspection Item |
客户规格书标准 Client's Spec & Tolerance |
实测最小值 Min. Found |
实测最大值 Max. Found |
实测平均值 Avg. Found |
单项判定 Result |
测量工具 Measuring Tool |
|---|---|---|---|---|---|---|
| 单品克重 (g) Unit Weight (g) |
电子克重秤 Electronic Scale |
|||||
| 满口容量 (ml) Brimful Capacity (ml) |
纯水称重法 Water Weighing Method |
|||||
| 外径 / 口径 (mm) Outer / Neck Diameter (mm) |
数显卡尺 Digital Caliper |
|||||
| 主体高度 (mm) Total Height (mm) |
卡尺 / 高度计 Caliper / Height Gauge |
|||||
| 平均壁厚 (mm) Average Wall Thickness (mm) |
测厚规 / 卡尺 Thickness Gauge / Caliper |
3. 现场功能性及特殊工艺测试（视工厂设备可选执行） / On-Site Functional & Special Process Tests (Optional based on factory equipment)
| 测试模块 Test Module |
标准操作要求 Standard Operating Procedure (SOP) |
执行状态 Status |
实测现象 / 数据记录 Test Findings / Data Record |
判定 Verdict |
|---|---|---|---|---|
| 密封性测试 (真空测试) Leakage Test (Vacuum Test) |
组装内容物或水，在 -0.05 MPa 至 -0.08 MPa 下抽真空保持 5 分钟。 Assemble with product or water, draw vacuum to -0.05 MPa to -0.08 MPa, hold for 5 minutes. |
|||
| 扭力测试 (螺纹盖 / 泵) Torque Test (Screw Cap / Pump) |
使用扭力计测量螺纹盖扣合的锁紧扭力与开启扭力。 Use a torque meter to measure the tightening torque and opening torque of the screw cap. |
锁紧 / Tightening: N·m / 开启 / Opening: N·m | ||
| 印刷附着力 (百格 / 胶带) Cross-Hatch Adhesion Test (Tape Test) |
百格刀划格 / 用 3M 610 胶带紧压在丝印烫金图案上，90° 快速撕扯 3 次。 Cross-hatch scoring / Apply 3M 610 tape firmly on silk screen or stamping pattern, peel off rapidly at 90° for 3 times. |
|||
| 耐化学测试 (酒精擦拭) Chemical Resistance Test (Alcohol Rub) |
使用 95% 浓度医用酒精浸湿纯棉布，在表面印刷 / 电镀层用力来回擦拭 20 次。 Use 95% medical alcohol to wet cotton cloth, rub back and forth firmly on printing/plating surface 20 times. |
|||
| 机械组装配合与吸管测试 Mechanical Assembly & Dip Tube Test |
泵头 / 盖与瓶身配合旋合顺畅；泵芯出料顺畅；吸管长度不顶底且不悬空。 Pump/cap fits smoothly with bottle; pump primes fluently; dip tube length is neither bending at bottom nor suspended. |
吸管标准 / Tube Std: mm / 顶底弯曲 / Bending: pcs | ||
| 运输跌落测试 (大货整箱) Carton Drop Test (Finished Goods) |
已包装成品外箱，按标准高度执行 1角 3边 6面 自由落体跌落。 Packed master carton dropped from standard height: 1 corner, 3 edges, 6 faces. |
4. 外观缺陷统计明细（外观分区判定结果） / Defect Summary (Visual Zone Inspection Results)
| 缺陷等级 Defect Classification |
对应 AQL AQL Limit |
合格接收数 Ac Accept (Ac) |
不合格拒收数 Re Reject (Re) |
现场具体缺陷描述（位置 + 现象 + 数据 / 数量） Specific Defect Description On-Site (Location + Symptom + Data/Qty) |
实际计数值 Found |
|---|---|---|---|---|---|
| 致命缺陷 (CR) Critical Defect (CR) |
AQL 0 | 0 | 1 | ||
| 严重缺陷 (MA) / Major Defect (MA) | AQL 2.5 | ||||
| 轻微缺陷 (MI) / Minor Defect (MI) | AQL 4.0 |
质量验收最终结论声明 / Final Acceptance Declaration: 本检验基于现场随机抽样。本报告并不免除供应商对后续发现的潜伏缺陷所应承担的合同义务或质量责任。/ This inspection was performed based on random sampling from the available lot at the time of inspection. This report does not relieve the supplier from their contractual obligations or liability for any latent defects subsequently discovered.
检验员 (QC) 现场签署 / Canton Buying Desk Inspector (QC) Signature：
签署日期 / Date of Signature: YYYY / MM / DD
供应商 / 工厂质量负责人 (QA/QC Manager) 现场确认 / Supplier / Factory QA/QC Manager Confirmation：
确认日期 / Date of Confirmation: YYYY / MM / DD